Loading ...
Loading ...
Loading ...
Functions
15
First Wash
When first using the washing machine, let it run unloaded for one
complete program to prevent the laundry from being tainted by oil
or dirty water from within the machine. You should run the machine without
laundry, but with detergent, with a 60°C program.
Open the washer door put in the laundry piece by piece. Close the door
tightly.
Loading the appliance
Open the washer door put in the laundry piece by piece. Close the door
tightly.
Do not overload the washing machine.
Selecting Detergent
The washing efficiency and the performance are determined by the quality of detergent used.
Special non-foaming detergent produces good washing results. Use specific detergents for synthetic
and woollen goods. Do not use dry cleaning agents such as trichloroethylene and similar products.
Do not add more detergent than needed; otherwise, it may cause the following situations
and the washing machine may malfunction impacting on the life of the machine.
Due to the increasing foam, the rinse me will be longer than normal;
The foam may overflow from the detergent drawer because
of increased pressure of the foam.
The foam may remain in the machine after the final spin
and require cleaning out of the machine
Recommendation:
Clean the detergent drawer once a week.
When using the prewash program, please add half of the recommended
dosage.
Please follow the dosage recommendations on the powder or liquid detergent
package.
Adding Detergent
Slide out the detergent drawer and put the required detergent and softening agent into the
corresponding compartments. Push back the drawer gently. (Refer to the instructions on the drawer)
For prewashing program, detergent should be added to both compartments
1 and 2.
For other programs, do not add detergent to compartment 1.
Use liquid detergent according to the instructions on its package. Do not use
liquid detergent if the prewash mode or "Delay" is selected.
Loading ...
Loading ...
Loading ...