Loading ...
Loading ...
Loading ...
Tools Necessary:
Scl'ews j
TO DISCONNECT
1. Press outer ring against race
remove TUDe
oush until mark touches face of fitting
Phillips head
DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways, follow
these steps to remove the doors.
1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
3. Close doors.
To Remove Refrigerator Door:
1. Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge with soft lead pencil. This will make it easier to realign doors
when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door aside.
4. Remove bottom hinge, if necessary.
5. Reverse this procedure to reinstall refrigerator door.
To Remove Freezer Door:
1. Disconnect water line coming from ower hinge of freezer aoor at connection
located under front of freezer: Press ouler nng against face of fitting, then pull to
remove tube.
2. Remove top h_nge cover screw on lreezer door and remove cover.
3. Disconnect wrong harness connector plug at tor_ htnge: D_ace your thumbs on flat
sides of each connector aria Dana both Earts eacK and forth, then with firm grasp,
pull both pieces apart.
4. Trace around hinge wlth soft earl Pencil This wiI make _teas_er to realign doors
wnen they are reDIaced.
5. Remove [co hinge allowing w_nng harness to DUll through hinge and lift freezer
door off at bottom hinge Din Lay door dowr flat to avoid k_nking water line.
6. Remove bottom h_nge, if necessary.
7. Reverse this procedure to reinstall freezer door.
When Dam doors qave oeen reinstalled, connect water I_ne by inserting tube and
push until mark tOUCheSface of fitting, replace toe grille and ptug in electrical power
cord. Turn both temperature controls [o center position. Adjust settings as necessary.
Loading ...
Loading ...
Loading ...