Loading ...
Loading ...
Loading ...
This Owner's Guide provides specific operating instructions for
your model. Use the refrigerator onIy as instructed in this Use &
Care Manuai. Before starting the refrigerator, follow these
important first steps.
LOCATION
o Choose a ptace that is near a grounded electrical outleL
Do Not use an extension cord or an adapter plug.
o If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
SOUrCeS,
. The refrigerator must be instaIIed on a floor that is level
and strong enough to support a fully loaded refrigerator.
. Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
Installation Clearances
. Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top .................. 3/8"
Back ........................... 1"
DOOR OPENING
To Remove Toe Grille:
2.
Open freezer and fresh food compartment doors.
Working from left side of toe grille, slip your fingers
between top of toe grille and cabinet. Gently pull
forward until first set of
tabs are free. Slide
your hand down past Cabinet
the free tabs and pulI
forward again until the
second set of tabs are
free. Continue this Grille / _-_.,
"i
process until all tabs . j_;
-<<.
are free and the toe __ _
grille can be removed.
I1
(See graphic at top of
page in right column.)
LEVELING
Ali four corners of your refrigerator must rest firmly on a solid floor_
Your refrigerator is equipped with adiustabie front rollers to help level
your unit. To ensure proper door seal and assist door closing, the
refrigerator should be tilted 1/4" (6 ram), front to back.
To Level Your Refrigerator:
1. Remove toe grille, (See "To Remove Toe Gri//e',)
2. Use flat-blade screwdriver or 3/8" socket wrench to adjust
front rollers.
Your refrigerator should be positioned to allow easy access to a
counter when removing food. For best use of drawers and
freezer baskets, the refrigerator should be in a position where
both the refrigerator and freezer doors can be fully opened.
TOE GRILLE INSTALLATION/REMOVAL
To install Toe Grille:
1. Open freezer and fresh food compartment doors.
2. Line up toe grille at base of refrigerator, making sure the
four bottom tabs are resting through holes at base of
cabinet.
3. Starting from Ieft side of toe grille, press in on first top tab
using your thumb and push toe grille forward until it snaps
in place. Continue this process until al! tabs are snapped
in place and toe grille is secured to refrigerator.
3,
I Raise
i_iiiii
© s
Check both doors to be sure seals touch cabinet on atl four
sides.
Loading ...
Loading ...
Loading ...