Loading ...
Loading ...
Loading ...
Use and Care Guide English | 15 |
Care and Cleaning
Grease Filters Cleaning
WARNING
Be sure the entire appliance (including the lters
and lights) has cooled and grease has solidied
before attempting to clean any part of the
appliance.
Your hood has removable aluminum mesh lters. They must
be cleaned when the FILTER light illuminates on the touch
panel or whenever they collect grease. When used over a
grill, wok or other high grease applications, more frequent
cleaning may be required.
The lters may be washed by hand or in the dishwasher.
Soak the ventilation lters in hot water using a mild deter-
gent. Rinse well and shake to dry.
Slight discoloration can occur when cleaning the lters in
a dishwasher. This has no inuence on the function of the
grease lters.
NOTE: Reverse the directions below to remove the lters.
Ensure lters are cool and grease has solidied before
removal.
NOTE: Do not use cooktop, rangetop, or range while hood
is disassembled.
To Install Filters:
• Remove the lter by pulling the spring release lter
latch and then pulling down the lter.
• Reinstall the lter by making sure the spring release
lter latch is toward the front. Insert aluminum lter
into upper track.
• Push in spring release lter latch.
• Push up on aluminum lter and release handle to latch
into place.
Access additional tips and tricks through the Home Con-
nect™ app.
Cleaning Chart
Anodized
Aluminum
Surfaces
Wash top and underside with hot sudsy
water.
Rinse and wipe dry or apply Fantastic®
or Formula 409
®
rst to a clean sponge
or paper towel and wipe clean. DO NOT
USE powdered cleaners or steel wool
pads.
Aluminum
Mesh Filters
Clean lters in the dishwasher or by
agitating in sudsy water. Ensure that
there is no soil trapped in the ne mesh.
Dry the lters before reinstalling them.
Plastic
surfaces
DO NOT REMOVE control buttons.
Wipe with a moist soapy sponge. Rinse
and dry.
Painted
surfaces
For general care, wipe the outside of the
hood with sudsy water or household
cleaners such as Fantastic or Formula
409, rinse well and dry with a clean soft
cloth to avoid water marks. DO NOT USE
powdered cleansers or steel wool pads.
Stainless
Steel
Surfaces
Wipe and dry stainless steel in the same
direction as the grain. Avoid using too
much pressure, which may mar the
surface. To remove nger prints and give
added shine, use cleaners such as
Stainless Steel Magic. Do not allow any
cleaning compounds to remain in contact
with stainless steel for extended periods.
Hood Surface Cleaning
• For general care, wipe the outside of the stainless
steel with mild, lukewarm, soapy water. Always wipe
and dry in the direction of the stainless steel grain.
Avoid using too much pressure, which may mar the
surface.
• DO NOT use abrasive products such as steel wool.
• DO NOT use cellulose sponges. Some sponges are
processed with salt and can cause corrosion by
leaving salt deposits on the metal.
• DO NOT allow any cleaning compounds to remain
in contact with stainless steel for extended periods.
• DO NOT USE CHLORINE-BASED CLEANERS.
• To remove ngerprints and produce added shine, use
a stainless steel cleaner or conditioner. The
THERMADOR Stainless Steel Conditioner can be
purchased online (US only) at:
www.store.thermador.com (order part number
00576697).
Loading ...
Loading ...
Loading ...