Loading ...
Loading ...
Loading ...
Operations
English42
Operations
Manual Dry
You can change the drying settings manually to your preference.
QUICK DRY
A quick drying cycle running for 30 minutes.
The default cycle time is 30 minutes. However, you may
manually change the cycle time if necessary.
TIME DRY
You can specify a cycle time in minutes.
If TIME DRY is selected, the Eco Dry function is enabled by
default. For more information, see Eco Dry in the “Control panel”
section.
AIR FLUFF Tumbles the load in room temperature air.
WRINKLE RELEASE
(DVE(G)50T5300*
/ DVE(G)50R5200*
models only)
The WRINKLE RELEASE cycle will release wrinkles from items
that are clean, dry, and only slightly wrinkled, such as clothes
from a crowded closet, suitcase or items that have been in the
dryer too long after the cycle has ended. WRINKLE RELEASE can
be used with any temperature selection.
Steam Cycles (DVE(G)50R5400* models only)
Use steam to reduce wrinkling and odors on items.
Cycle Description
STEAM SANITIZE
Use to sanitize items by applying steam and high-temperature
heat to the fabric. This cycle can make items soft and reduce
smells. Conrm that the laundry load is wet or partially wet
before starting this cycle.
REFRESH
Use to smooth out wrinkles and reduce odors in loads of one to
four items. With this cycle selected, a small amount of water is
sprayed into the dryer drum after several minutes of tumbling
with heat. Conrm that the laundry load is dry.
WRINKLE AWAY
For best results, load 2-3 items at once. You can extend the
drying time by a minimum of 20 minutes, depending on the
item type or load. Conrm that the laundry load is dry.
Untitled-6 42 2020-12-04 4:25:32
Loading ...
Loading ...
Loading ...