Loading ...
Loading ...
Loading ...
6.4 Drying
• Spread the blanket out on a clean surface (e.g. a large table) to dry in a shady
area.
• Your blanket can also be dried on a clothes line provided the blanket is not
creased or folded.
• Ensure pegs are not used on the element areas of the blanket if hanging on the
line.
Note: The blanket must be thoroughly dried including controller sockets before
being re-fitted to your bed.
• With normal use it is recommended you hand wash your blanket once a year
Do Not Wring the Blanket. Do Not Spin Dry.
7 Servicing Your Blanket and Controller/s
NOTE: There are no user serviceable parts in this blanket or controller/s.
• The blanket should be examined frequently for signs of wear, either of the blanket,
controller or flexible cord. If wear is visible or if any abnormality or defect in
operation in the blanket is observed, discontinue use immediately and consult a
qualified and registered person for service.
• It is recommended that your electric blanket is inspected by a qualified and
registered person after 3 years of use.
• If the blanket is not operating correctly, please check the Troubleshooting Guide in
the back of this manual before contacting our service department.
8 Storage
When storing the blanket, allow it to cool down before folding. Fold neatly (or rolled)
but not tightly without sharp bends in the heating elements and store where no other
heavy objects will be placed upon it.
Store is a dry place where it cannot be damaged.
Page 11 of 16
Rev Draft
Loading ...
Loading ...
Loading ...